Mission Plus Hb Quick Start Manual

First setup

Put the 4 batteries provided into the device. The meter will prompt you to enter the current
Date and Time. Use the left (◀) and right (▶) key to change the date and time, and the
power button ( ) to save.
Upon setting the date and time, the meter will turn itself off.

Configuring the Measuring Device

You must configure the meter for the first use. This only needs to be done once.
1. Press and hold the On/Off button
Press to set the first day of testing. Press once (Left) ◀ and set number to 99 to
start the first test as day 1. Press
2. Press twice right ▶ to continue to SET, and On-Off
3. Use ◀ and ▶ to choose a 12 or 24-hour time format.
Press to save and continue.
4. Use ◀ and ▶ to set the correct year.
Press to save and continue.
5. Using ◀ and ▶ to choose the month and date.
Press to save and continue.
6. Use ◀ and ▶ to set the current hour and minutes.
Press to save and continue.
7. Use ◀ and ▶
test number will reset to 1 each new test day if this is turned on. .
Press to save and continue.
8. Use ◀ and ▶ to toggle between g / dl, g / L of mmol / L units.
Press to save and continue.
9. Use ◀ and ▶ to turn the meter sound on or off.
Press to save and continue.
10. The display shows
Press once Left ◀ to navigate to ELT (exit)
Press to exit the setup.
The meter is now ready for use.
Mission Plus Hb Hemoglobin Measuring Device
to select No .SET ON. to switch the RESET of the test number on or off. The
No
SET.
SETUP
for four seconds. The meter will show
to save. The display will show
No
No
.SET.
to enter the settings mode.
SET.