Hardware Set-Up Procedures - Xsarius SNIPER 4K Quick Start Manual

First Time Installation
1. 1. If you use the network cable to connect to the LAN, you can
set the Ethernet settings via the green button (See step 2). If you
want to use a wireless network, click on the yellow button.
(See step 3)
2. When you have the option DHCP ON, it will automatically detect
the correct IP address. DHCP OFF is used when you want to use
a certain IP adddress. In this case, you need to enter the correct
your settings.
3. In the WiFi networking Settings menu, a screen appears
showing the search results for available WLANs, select the appriop-
you've used it you will need to enter your WiFi network password to
be able to connect.
4. Press > button to go to Time Setting.
et
Ethhernet D evice:
Connect Stat e:
Connect T ype:
IP Address:
Netmask :
Gateway address:
DNS add ress:
32
Exit
Network Settings
Dinsda g
23:3 0
3/12/2019
eth0
Internet
DHCP
192.168.16.95
244.555.432. 0
192.124.53.1
192.123.35. 2

Hardware Set-up procedures

Preparation for Installation
Step 1
Unpack the box and check out the supplied accessories.
Step 2
Prepare the television box and power supply jack.
Step 3
Place the box beside the TV set.
a) Before making any physical connection to other
equipment, unplug the unit. Also ensure that AC
power is disconnected from the other equipment.
b) The connections of all video/audio cables sup-
plied are colour coded with the jacks of related
equipment. When connecting, make sure that the
colours are matched.
c) Proper physical connection is important, so be
sure to insert the plug completly.
© 2020 AD BV