Potek BC0401 Quick Start Manual
  1. Manuals
  2. Brands
  3. Potek Manuals
  4. Battery Charger
  5. BC0401
  6. Quick start manual

Potek BC0401 Quick Start Manual

Smart battery chargers
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

6/12V Car & Motorcycle
Smart Battery Charger
BC0401
IP65
PRIOR TO USE, READ AND UNDERSTAND
PRODUCT SAFETY INFORMATION.
Failure to follow the instructions may result in ELECTRICAL
SHOCK, EXPLOSION, or FIRE, which may result in SERIOUS
INJURY, DEATH, DAMAGE TO DEVICE or PROPERTY.
Do not discard this information.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BC0401 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Potek BC0401

Summary of Contents for Potek BC0401

  • Page 1 6/12V Car & Motorcycle Smart Battery Charger BC0401 IP65 PRIOR TO USE, READ AND UNDERSTAND PRODUCT SAFETY INFORMATION. Failure to follow the instructions may result in ELECTRICAL SHOCK, EXPLOSION, or FIRE, which may result in SERIOUS INJURY, DEATH, DAMAGE TO DEVICE or PROPERTY.

  • Page 2: Important Safety Information

    It is quite possibly the safest and most efficient charger you will ever use. The BC0401 have REPAIR mode ,you can use this mode to recovery storing, old, idle, damaged, stra�fied or sulfated ba�eries.
  • Page 3 Ensure that the cable does not jam or comes into contact with hot surfaces or sharp edges. INSTRUCTION MANUAL Connec�on to the mains supply must be in accordance with the na�onal regula�ons for electrical installa�ons. A. Connect the Charger to Ba�ery WARNING: Explosion and Fire Hazard RISK OF EXPLOSIVE GASES.
  • Page 4 B. CHARGING BATTERY INSTALLED IN VEHICLE LCD Display Manual Note: Connect and disconnect the DC output clamps ONLY AFTER removing the AC plug from the electrical outlet. Never alow the DC output clamps to touch each other. This may cause a spark. CHOOSE THE GROUND SYSTEM YOU WILL USE AND FOLLOW THE STEPS Connec�ng to a nega�ve-grounded system: 1.
  • Page 5 It is important to understand the differences and purpose of each charge mode and battery type.Do Using 12V Repair not operate the charger until you confirm the appropriate charge mode and battery type for your battery. Below is a brief descrip�on: 12V Repair is an advanced ba�ery recovery mode for repairing and storing, old, idle, damaged, stra�fied or sulfated ba�eries.

  • Page 6: Malfunctions And Solutions

    MALFUNCTIONS AND SOLUTIONS TECHNICAL SPECIFICATIONS Rated Input Voltage AC: 110-120 VAC, 50-60Hz Problem Cause Solu�on Working Voltage AC: 85-130 VAC, 50-60Hz Possible ba�ery short and Do not use/scrapped. can not be repaired. Input Current: 1.1A rms (at full charging current) Efficiency: 85% Approx.

  • Page 7: Customer Service

    CUSTOMER SERVICE 18-month limited warranty Lifetime technical support 302-261-8788 support@potekelec.com (US) @Potek.fans @PotekSupport @Potekelectronic...

Table of Contents