Advertisement

DIGITAL USB ADAPTER(DSU-09M) TO HEADSET
Thank you for choosing Digital USB to headset sound card adapter. Use
the adapter cord to adapt any headsets to any PC via the USB port on
your PC.
This User guide will help you in setting your new headset and adapter
cord to your computer, using and maintaining the USB adapter, and all
the necessary information required to receive the full benefits from USB
adapter
This user guide contains the following sections ;
1.

Operating System

2.
3.
4.
5.
General USB troubleshooting in Windows 98 SE and Windows
ME.
1.
Operating System
1)
Windows XP, Windows 7, Windows 8
2)
Windows 2000,VISTA
3)
Windows ME (Millennium Edition)
4)
Windows 98 Second Edition
5)
Software : None required

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSU-09M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Axial DSU-09M

  • Page 1 DIGITAL USB ADAPTER(DSU-09M) TO HEADSET Thank you for choosing Digital USB to headset sound card adapter. Use the adapter cord to adapt any headsets to any PC via the USB port on your PC. This User guide will help you in setting your new headset and adapter...
  • Page 2 DH-035TB Hook On/Off Volume Down Volume Up TX Mute...
  • Page 3 Features 1) USB plug & play chip 2) Complete Digital sound card 3) Clear live voice transmission with VoIP 4) Digital in-line receive volume control 5) In-line microphone (Tx) MUTE with LED indicator 6) Hook On/Off with LED indicator 7) Headset rapid release connector 8) ON/OFF Control button with VoIP software(MS-Lync) Installation Connecting the USB adapter to your computer’s USB port is a simple...
  • Page 4 General USB troubleshooting in Windows 98 Second Edition and Windows ME. The information in this article applies to : *Microsoft Windows Millennium Edition *Microsoft Windows 98 Second Edition Because USB device are plug and play devices, there is little that you can do to control or configure them.
  • Page 5 Malfunctioning, Incorrectly configured, or Missing device driver When you plug in a USB device, the computer should load and then configure the device without ever requesting a device driver (assuming that the device falls within the defined and supplied class drivers). If the computer prompts you for a device driver, check with the manufacturer of the device to determine if a driver is available.
  • Page 6 The symptoms of malfunction or incorrectly configured firmware might be unusual. Typically, when you remove and then re-add a USB device, the device simply becomes available again. However, the device may appear as a second instance of a device, and load itself as such in Device manager.

Table of Contents