1. Manuals
  2. Brands
  3. CAB Manuals
  4. Adapter
  5. PS7
  6. Operator's manual

CAB PS7 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's Manual
PS7
Pause Adapter
Made in Germany

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS7 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CAB PS7

  • Page 1 Operator's Manual Pause Adapter Made in Germany...
  • Page 2 GmbH & Co. KG. The replication, conversion, duplication or divulgement of the whole manual or parts of it for other intentions than its original intended purpose - in particular the procurement of spare parts for products sold by cab – demand the previous written authorization by cab.

  • Page 3: Table Of Contents

    Table of Contents Introduction .................4 Instructions ..................4 Intended Use ...................4 Product Description ............5 Mounting ................5 Operation ................6 Peripheral Interface.............7 Pin Assignment ................7 Signals .....................8 Internal Circuit of the Inputs .............9 Internal Circuit of the Outputs ............9 EU Conformity Declaration ..........10...

  • Page 4: Introduction

    1.2 Intended Use • The device is an option only for cab A+ label printer. Any other use or use going beyond this shall be regarded as improper use. The manufacturer/ supplier shall not be liable for damage resulting from unauthorized use; the user shall bear the risk alone.

  • Page 5: Product Description

    Product Description The pause adapter PS7 is configured for communication between an external signal generator and a printer to pause a print job via an external signal. After deactivation of the pause signal the print job will be continued. The adapter is connected to the printer via the SUB-D 9 external interface of the printer.

  • Page 6: Operation

    After completion of the current label the print job will be paused.  Deactivate the signal XPSE. The print job will be continued. XPSE XFEH XEDG XDNB XEDST RXPSE RXFEH RUEL Figure 2 External minimum circuit at the pause adapter PS7...

  • Page 7: Peripheral Interface

    Peripheral Interface 5.1 Pin Assignment Pin 8 Pin 15 Pin 9 Pin 1 Figure 3 Peripheral interface PS7 Pin Signal Direction Standard Function XPSE Input Pause XFEH Output External error Do not use ! Do not use ! XEDG Output...

  • Page 8: Signals

    Peripheral Interface 5.2 Signals Pin Signal Description Activation / Active State XPSE Pause +24 V between Pin 1 and Pin 9 Interruption of the print job after the current label XFEH External error +24 V between Pin 2 and Pin 10 Error message from the external control.

  • Page 9: Internal Circuit Of The Inputs

    ATTENTION ! Output !!! Do not connect any external voltage to Pin 15 Table 2 Signals of peripheral interface PS7 5.3 Internal Circuit of the Inputs The inputs XPSE and XFEH are designed for an operating voltage of 24 V.

  • Page 10: Eu Conformity Declaration

    This declaration is valid only when the pause adapter is used together with printers of the A+ series. Manufacturer: cab Karlsruhe Description: Pause adapter...

Table of Contents