Advertisement
Quick Links
Advertisement
Summary of Contents for Haltian Thingsee POWERCOVER
- Page 1 POWERCOVER User and Installation Guide v.21.03...
- Page 2 Welcome to use Thingsee Congratulations on choosing Haltian Thingsee as your IoT solution. We at Haltian want to make IoT easy and accessible for everyone, so we have created a solution platform that is easy to use, scalable and secure. I hope our solution will help you achieve your business goals! Pasi Leipälä...
-
Page 3: General Installation Instructions
Using Thingsee POWERCOVER Thingsee POWERCOVER can be used as a power source for the following Thingsee sensor devices: Thingsee PRESENCE, Thingsee ENVIRONMENT and Thingsee DISTANCE, in cases where extremely long operating time without battery change is needed. Thingsee POWERCOVER works with 3 AA Lithium batteries which provide Thingsee sensor devices up to 10 years of battery life. - Page 4 Things to avoid in installation Avoid installing Thingsee products near the following: Thick concrete structures or thick fire doors Electrical transformers or thick electrical wires Escalators Nearby heating or cooling devices and/or vents Direct sun light Nearby halogen lamps, fluorescent lamps or similar lamps with hot surface Nearby radio equipment like WiFi routers or any other similar high power RF transmitters...
-
Page 5: Installation
Thingsee POWERCOVER, first remove the bottom cover and batteries from the sensor. The sensor can then be just snapped to its place on top of Thingsee POWERCOVER. Make sure that the direction of the sensor is correct for assembly. After snapping to its place, the sensor... - Page 6 If you need to open the device (e.g. for changing the batteries), use the opening key provided with the device. Opening Key Place the opening key to the slot between Thingsee POWERCOVER covers and bend the key away from the device. If you change the batteries, please use Lithium batteries to ensure correct functionality.
- Page 7 If you want to remove the sensor from the Thingsee POWERCOVER, remove the batteries first. Place the straight end of the Opening Key to the slot inside the Thingsee POWERCOVER. Push the tool towards the sensor and the sensor is released.
- Page 8 The recommended micro-USB power source is Sunny SYS1381N-1205- W2E (for Europe). Default measurement and reporting Thingsee sensor devices notify Thingsee Operations device management system on the following: • if they are using Thingsee POWERCOVER. • Thingsee POWERCOVER battery status. • Used power source (batteries or USB-cable).
-
Page 9: Device Info
Battery type: 3 x AA primary lithium, replaceable, non-chargeable Expected battery life up to 10 years MicroUSB for power supply at 5 V ± 5% / 500mA More device info can be found at support.haltian.com Device measurements Weight: 100 g (including batteries) - Page 10 Hereby, Haltian Products Oy declares that the equipment type TSPC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.haltian.com Haltian Products Oy vakuuttaa, että laitetyyppi TSPC on direktiivin 2014/53/EU mukainen. EU- vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: www.haltian.com...
- Page 11 - Do not paint the device. Paint can p revent proper operation. Damage If the device is damaged contact support@haltian.com. Only qualified personnel may repair this device. Small children Your device is not a toy. It may contain small parts. Keep them out of the reach of small children.
- Page 12 Get to know other Thingsee devices Thingsee PRESENCE Thingsee ENVIRONMENT Thingsee BEAM Thingsee LEAKAGE Thingsee ENVIRONMENT Thingsee ANGLE RUGGED RUGGED RUGGED Thingsee AIR Thingsee GATEWAY Thingsee GATEWAY Thingsee GATEWAY GLOBAL For all devices and more information, visit our website www.haltian.com or contact sales@haltian.com...