Advertisement
Quick Links
CanDo Rickshaw Rehab Exerciser
Sku #: 10-0690
ATTENTION
Your CanDo Rickshaw Rehab Exerciser has been built to the
highest standards of quality to ensure years of superior
service. Please take the time to read the informative
instruction guide and pay particular attention to the safety
information provided.
Here are some precautions you should take to reduce the
risk of injury:
1. Read and understand ALL instructions.
2. Determine, with a physician or therapist, the suitability of this product for the intended user.
3. Check that all bolts, pivots, and other parts are tight at all times.
4. Always lock your wheelchair brakes.
5. Keep fi ngers away from the oar pivot points.
6. Do not drop the oars with weights on them.
7. Work up the amount of weight and duration slowly, under the supervision of your therapist.
8. SAVE THESE INSTRUCTIONS.
ASSEMBLY OF YOUR RICHSHAW REHAB EXERCISER
1. Assemble the base
Bolt the two fl at plates to each side of the base, as in Figure 1. The front plate is mounted on the backside of the
vertical posts, with the fl at plates' fl ange at the top.
CanDo and
are trademarks of Goldberg.
Rickshaw
™
instructions
1
rehab exerciser
v0420
Advertisement
Summary of Contents for Cando Rickshaw
- Page 1 CanDo Rickshaw Rehab Exerciser Sku #: 10-0690 ATTENTION Your CanDo Rickshaw Rehab Exerciser has been built to the highest standards of quality to ensure years of superior service. Please take the time to read the informative instruction guide and pay particular attention to the safety information provided.
- Page 2 1. Stack any standard disk weights on the upright weight posts at the rear of the oars. (Weights not included) 2. Roll your wheelchair between the two oars, then lock both brakes. You may exercise either facing the Rickshaw or have it at your back.