Table of Contents
Advertisement
en Cleaning and servicing
Insert the drain hose into the
9.
holder.
Cleaning the drain pump
Requirement: The drain pump is
empty. → Page 33
Since water may remain in the
1.
drain pump, unscrew the pump
cap carefully.
‒
Clean the interior, the thread on
2.
the pump cap and the pump hous-
ing.
Ensure that the impeller in the
3.
drain pump can rotate.
Insert the pump cap.
4.
34
Screw the pump cap as far as it
5.
will go.
90°
The handle on the pump cap must
be in a vertical position.
Insert and close the service flap.
6.
2
1
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the Άντληση pro-
gramme after you have emptied the
drain pump.
Turn on the water tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into compart-
4.
ment II.
Select a suitable programme for
5.
draining.
→ "Programmes", Page 23
Advertisement
Table of Contents
