Philips VoiceTracer DVT2010 User Manual page 31

13
Set the time as described in
page 34).
14
Press the record key, g, to confirm.
15
Press the stop key j.
16
Press + / – to select the
Duration
duration.
17
Press the record key, g, to confirm.
18
Press + / – to set the required recording duration. Press
for unlimited recording.
19
Press the record key, g, to confirm.
20
Press + / – to select the
Record source
source.
21
Press the record key, g, to confirm.
22
Press + / – to select if the device should record from an internal
microphone or an external source.
23
Press the record key, g, to confirm.
24
Press the stop key j.
The device will start recording at a specified time.
X
Table of contents
(see also chapter 9.3.1 Set date & time,
function to set the recording
no limit
function to set the sound
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.1.6 Enabling/disabling voice-activated recording
If voice-activated recording is enabled, recording session will start
when you begin speaking. When you stop speaking, the device will
automatically pause recording after three seconds of silence, and
resume only when you begin speaking again.
Use the voice activation level to set the volume at which the device
should begin recording.
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the
Voice Activation
4
Press the record key, g, to confirm.
5
Press + / – to select the
On
6
Press the record key, g, to confirm.
If this feature is on, the Š symbol is displayed.
X
7
Press + / – to select the
Off
recording.
function.
function.
function to turn off voice-activated
31
Settings