Subscribe to Our Youtube Channel
Summary of Contents for StudioDesk VTV01WH
- Page 1 VTV01WH V tower speaker stand white VTV01BL V tower speaker stand all black Please assemble your product on soft surface to avoid scratches and damages on lacquer.
- Page 2 The Desk You Deserve Thank you for making StudioDesk your desk of choice! Before beginning assembly of your stand, let’s get familiar with the parts you have received in your package. Please match the corresponding numbers on this page with the drawings.
- Page 3 Step One Insert dowels (7) into the holes as shown in the illustration. Use a rubber hammer if needed. Step Two Place body parts to the base on dowels (7) Step Three Insert dowels (7) into body parts as shown on the right.
- Page 4 Step Five Insert Barell nut in the hole as shown on the ilustration. Line on the nut has to be towards the top. Step Six Push Barell nut into the hole with the screw driver so the thread can be seen from the top. To the same on All 4 holes.
Need help?
Do you have a question about the VTV01WH and is the answer not in the manual?
Questions and answers