Advertisement
Available languages
Available languages
IMPORTANT INFORMATION
1
Always read the instructions carefully before installation, failure to do this could result in damage
to the product, property or harm to the installer.
2
Install only by certified electricians.
3
It is recommended that this product is used on a circuit board protected by an Earth Leakage
Circuit Breaker or Safety Switch.
4
Allow suitable ventilation around the light fitting and do not cover with any material.
5
Do not immerse any part of the light fitting in water or any other liquids.
6
Regularly inspect the light fitting to ensure that no damage has occured, if damage is found
cease use and replace.
7
Do not attempt to modify this fitting in any way.
8
The LED driver and LED module are not replaceable.
9
Always install luminaires with the power switched of of isolated off to the area of installation.
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE: 220-240AC
IMPACT RESISTANCE: IK10
DIMMABLE: Yes
BEAM ANGLE: 180°
COLOR TEMPERATURE: Switchable 2700K/4000K/5000K
LUMEN: 12W 1150 - 1200 Lumens
18W 1790 - 1900 Lumens
25W 2300 - 2600 Lumens
IP RATING: IP65
CRI: >80Ra
MOUNTING TYPE: Surface mounted
5 | © Copyright 2021 Hoftronic
Advertisement
