Do you have a question about the CM1400 and is the answer not in the manual?
Questions and answers
Summary of Contents for Amperes CM1400
Page 1
Amperes Electronics. CM1400 offers 6 chimes and 2 siren tones with selectable balanced and unbalanced line output. Activation of chime shall be from front switches or via remote triggering terminal, enabling the unit to be linked to external sensors or triggering system such as alarm panel, remote mic or emergency switch.
Page 2
Warning : Do not connect the unit directly to back up batteries, as higher voltage in charging mode shall damage the unit. We recommend Amperes PS9400 power supply unit or any other regulated 24V DC adaptor. 5. REMOTE ACTIVATION PORT Triggering of the siren / tone / chime can be done remotely.
Page 3
External activation 3A Dry contact Output Line 1.2V balanced Output impedance 600 Ohm Gain +4 dB max Communication control RS485 Dimensions (WxHxD) 482 x 44 x 180 mm Weight 1.55 kg CM1400 | CHIME AND SIREN TONE GENERATOR PAGE 3...
Page 4
Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes Electronics Service Centres may be asked for by the purchaser or send directly to Amperes Electronics Sdn Bhd at 70 Jalan Industri PBP 3, Tmn Perindustrian Pusat Bandar Puchong, 47100, Puchong, Selangor, Malaysia or its authorized dealers.
Need help?
Do you have a question about the CM1400 and is the answer not in the manual?
Questions and answers