Advertisement
Quick Links
Advertisement
Related Manuals for Beef Eater Proline Artisan ODK
Summary of Contents for Beef Eater Proline Artisan ODK
- Page 1 Proline Artisan ODK Cabinets Assembly Procedure For outdoor use only...
- Page 2 IMPORTANT INFORMATION These instructions should be read in conjunction with the user manual. Adherence to the directions for use in the user manual is extremely important for health and safety. Failure to strictly adhere to the requirements in the user manual may result in personal injury, property damage and affect your ability to make a claim under the manufacturer’s warranty provided with your product.
- Page 3 PARTS Contents of your cabinet pack: Description Description Front Panel Rear Panel Top & Heat Shields Side Panel Base Panel Top Covering Panel Divider Panel Bottom Panel Top Panel Cover Adjustable Feet M6x40 Screw M4 Allen Key & M6 Washer M4x20 Screw Repair Tools &...
- Page 4 To assemble this cabinet, follow these steps: TIPS: it is best to assemble this cabinet as close as possible to where they will be used. ASSEMBLY: Step 1: Lay the base frame of the cabinet on the ground upside down, and screw the 4 legs in place. Screw each leg all the way in, then TURN base back to normal position with the legs down: Step 2: Position the REAR panel over the BASE panel, and lock to place by engaging into the hooks...
- Page 5 Step 3: In a similar manner to Step 2, position the FRONT panel on the BASE, and lock to place: Step 4: Lower the 2 SIDE PANELS in between the FRONT and BACK panels on the inside. Engage the two pins on the bottom. And lock to place with 2 screws on the top for each panel...
- Page 6 Step 5: Put the BOTTOM panel onto the base of the cabinet. (Front First). Step 6: Insert the DIVIDER panel:...
- Page 7 Step 7: Assemble SS Drawers. Please see separate instructions for SS Drawers installation. Step 8: Assemble Gas Tank Door frame. Please see separate instructions for installation.
- Page 8 Step 9: Place the TOP covering panel over the divider. (note the position of the hole for the Hose): Step 10: Carefully place the BENCH TOP into position. NOTE: The 6 pins at the corners of the cabinet sides need to engage with the holes at the benchtop’s underside.
-
Page 9: Care And Maintenance
Step 11: For the installation of the Barbecue and the Side-Burner, please refer to the instruction books supplied with these appliances. NOTE: When considering the position of your Outdoor Kitchen, ensure that a Fridge (if installed) is never exposed to direct sunlight. CARE AND MAINTENANCE The BeefEater Outdoor Kitchen is made out of durable and sturdy materials, and designed to withstand the wrath of time, however keeping it away from the elements, and only cleaning with... -
Page 10: Technical Information
TECHNICAL INFORMATION Note: Do not modify the BeefEater Outdoor Kitchen. Any deviation from factory structure could result in dangerous situations, and cause the voiding your warranty. Dimensions Width Height Depth Weight (Cabinet [mm] (Cabinet only) only) (Cabinet only) Cabinet only Barbecue Cabinet 1750 95 kg...