Sony PCG-GRX500 VAIO User Manual page 84

To connect a projector to the notebook
You can also connect a projector, such as the Sony LCD Projector, to the notebook or port replicator.
1.
Shut down the computer before you connect the projector.
2. Locate the VGA (Monitor) port on the rear panel of the notebook and the Headphone jack on the right panel
of the notebook.
3.
Plug the display cable (not supplied) connector into the VGA port, and plug the audio cable (not supplied)
connector into the Headphone jack.
4.
Plug the opposite end of the cables into the appropriate ports on the projector.
5.
Verify that the power cord is plugged into the projector and an AC outlet.
Connecting a Projector to the Notebook
Note:
See the manual that came with your projector for more information on its installation and use.
Page 84