Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ArtFox ATMIC 3000
Summary of Contents for ArtFox ATMIC 3000
- Page 1 ATMIC 3000 User manual Please read over this manual before operation the light...
- Page 2 Provide automatic adjustment of any 50-60Hz AC, from 90 to 260 volts, no need for regulation, attention XOP 15-OF lamps can not AC125V the following conditions. ATMIC 3000 models to be under the lamp, power supply and use. To avoid overload, each at least 16-20A lamp power, use the 2.5m square meters of cable.
- Page 3 “N” Yellow/Green Groundwire Installation ATMIC 3000 can be installed anywhere. Holder to be installed before installation, and installed rope Insurance. Warning: To use a secure attachment Calibration before installation： ·Lighting installation where at least 10 times more lighting can support the weight of light, ·Lamps from the mounting surface at least 1 meter away from the lighting at least 0.5 meters...
- Page 4 ·Output signal lines do not split into two signal lines output. ·Not to overload the connection. A signal line can connect a maximum of 32 ATMIC 3000 lights.
- Page 5 ·Finally, the signal line connected to the output jack of a strobe light into a signal the best terminator. Signal termination is a public signal line Caron, 2 feet and 3 feet in a 1/4W120 European resistance welding, the control signal so that it will not absorb reflection and cause interference.
- Page 6 switch 10 is usually closed. DIP Switch address setting CH 12 CH 14 CH 46 CH 100 Address setting for example...
- Page 7 Specifications The DMX Strobe is dimmable from 0-100%. Flash duration is controllable and for ultimate flexibility and variety of effect, variable adjustment of flash rate (20ms to 2 seconds) and flash intensity is possible; The DMX Strobe is both intense and intelligent. DMX controllable, it employs a smart, integrated heat control that eliminates the need for cool down time;...
Need help?
Do you have a question about the ATMIC 3000 and is the answer not in the manual?
Questions and answers