Advertisement
5. OPERATION
5.1.
Ensure the direction switch (fig.3) is in the mid (lock) position. Open the chuck by turning the rear chuck collar.
5.2.
Insert the required drill or screwdriver bit into the chuck fully and tighten.
5.3.
The speed range of the drill is controlled by the speed selector on top of the casing (high for drilling, low or screwdriving)
5.4.
Select clockwise or anticlockwise direction by means of the direction selector.
5.5.
Select the required screwdriver torque by turning the torque selector ring. The torque increases from 1-10; select
5.6.
Squeeze the trigger to start the drill; initial pressure switches on the LED worklight, further pressure starts the motor and increases speed.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
1. Remove the battery pack - see section 4.1.
2. Dispose of spent battery pack correctly.
ONLY dispose of or recycle according to local authority regulations.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme.
Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
ENVIRONMENTAL PROTECTION
BATTERY REMOVAL
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
fig.3
www.sealey.co.uk
01284 757500
sales@sealey.co.uk
01284 703534
CP6004, CP6014 Issue: 1 - 11/11/15
for drilling.
Advertisement
