Table of Contents
Advertisement
11. Remote Switch: The Power switch leads have a dual switch for powering in or
powering out your winch drum. The remote control allows you to stand clear of
the wire rope when the winch is under load.
12. Universal Flat Bed Mounting Channel: Your winch could have been optionally
supplied with a flat bed mounting channel that can be mounted to most flat
surfaces such as trailers, step bumpers, truck beds, etc. The mounting channel
also has holes to accept your roller fairlead.
13. Snatch Block: If your winch is supplied with a snatch block that can double the
pulling power of the winch, or change the pulling direction without damaging the
wire rope. We recommend you to use double line and snatch block for pulling
over 70% of the rated line pull.
WARNING – Do not exceed rated capacity shown in this table.
Layer
1
2
3
4
5
WARNING – Intermittent use only. Allow winch to cool between uses.
WARNING – Do not use winch to lift (vertically).
WARNING – Do not use winch to pull or move people in any way.
WARNING – NEVER cut, weld or modify any part of the winch or cable.
WARNING – A minimum of five wraps of cable around the drum barrel is
necessary for pulling and holding the rated load.
WARNING – Keep yourself and others a safe distance to the side of the cable
when it is under tension.
SAFETY PRECAUTIONS
WARNING
Rated line pull lbs (kgs)
4500(2041)
3642(1652)
3060(1388)
2638(1196)
2254(1023)
3
Total rope on the drum ft (m)
7.6(2.3)
17.0(5.2)
27.0(8.3)
38.6(11.8)
47.6(14.5)
Advertisement
Table of Contents
