Table of Contents
Advertisement
4.2 Network Settings
The Network menu contains three sub-menus that provide the network settings for the camera, such as
the IP Setting, DDNS Setting, and IP Filter.
Network >> Network
IP Setting
This item allows you to select the IP address mode and set up the related configuration.
- DHCP: The default setting is DHCP, this option allows your router to dynamically assign an IP
address to your camera. When the camera starts up, it will obtain an IP address from the DHCP
server of your router automatically. It is recommended to use Static IP instead of DHCP and assign
a fixed IP address for each of your camera, so that you can always locate the camera on your
network.
- Static IP: Select this option to assign a fixed IP address for the camera. You can use SkyIPCam
Utility to obtain the related setting values.
IP
Subnet Mask
Default Gateway
Primary/
Secondary DNS
Enter the IP address of the camera. The default IP setting is 192.168.2.240.
Enter the Subnet Mask of the camera. The default setting is 255.255.255.0.
Enter the Default Gateway of the camera. The default setting is 192.168.2.1.
DNS (Domain Name System) translates domain names into IP addresses. Enter the
Primary DNS and Secondary DNS that are provided by ISP. It is usually
- 24 -
Advertisement
Table of Contents
