INSTALLTION FOR MINIATURE THERMOSTATIC VALVE SS-TH60 – 1/2” MINIATURE THERMOSTATIC VALVE WITH VOLUME CONTROL SS-TH70 – 1/2" MINIATURE THERMOSTATIC VALVE WITH 2-WAY DIVERTER SS-TH80 – 1/2" MINIATURE THERMOSTATIC VALVE WITH 3-WAY DIVERTER Features: • Ability to pre-select water temperature – thus conserving water •...
Page 3
INSTALLTION FOR MINIATURE THERMOSTATIC VALVE 4. Use the Plastic Mudguard (1) (part of the package) to position the Valve (2) in the wall. This is done by checking the markings on the mudguard for the minimum/maximum settings which is 2 3/8” to 2 7/8”...
INSTALLTION FOR MINIATURE THERMOSTATIC VALVE Diagram 4: Representative Trim Parts Checklist Carefully remove all parts from the box. The following parts should be included. Item # Description Qty. Item # Description Qty. Temperature Control Dome Temperature Control Screw Dome Sleeve (raw brass) Temperature Control Handle Face Plate Volume Control Dome...
Page 5
INSTALLTION FOR MINIATURE THERMOSTATIC VALVE Removal and Maintenance of Cartridge (see Diagram 6) This thermostatic cartridge has screens to prevent dirt and unwanted particles from damaging the valve. Clogged screens can cause reduced flow and inefficient temperature mixture by the valve. You can easily clean the screens by following the instructions below.
Page 6
INSTALLTION FOR MINIATURE THERMOSTATIC VALVE Troubleshooting Malfunction Cause Remedy Cannot regulate temperature Dirt in check valves Remove and clean check valves Water supply reversed Reverse hot and cold supply lines Valve installed upside down Reverse valve Hot and cold water do not mix Lack of water pressure at one Correct water pressure at source of the inlets Blocked shower head...
Page 7
INSTALLTION FOR MINIATURE THERMOSTATIC VALVE Diagram 7: Dimensional Drawings SS-TH60: SS-TH70: SS-TH80: Miniature Thermostatic Valve P a g e...
Need help?
Do you have a question about the RIGDON and is the answer not in the manual?
Questions and answers