Table of Contents
Advertisement
Step 13
Confirm your settings at this page. If everything is correct, click Apply to save the settings, then
the camera will restart in 50 seconds.
Step 14
After the camera is restarted, you can unplug the network cable from it. It will take around 1 or 2
minutes for the camera connecting to the wireless router/AP.
To make sure the wireless connection is successfully established, open the SkyIPCam Utility and click
on Search. If the camera shows up in the list, it is connected to your wireless network successfully. If not,
please verify the SSID and the wireless security settings you configured at Step 12 are correct.
- 15 -
Advertisement
Table of Contents
