Do you have a question about the FCM 100 and is the answer not in the manual?
Questions and answers
Summary of Contents for Kathrein FCM 100
Page 1
FCM 100 2220000010 CO Detector User Manual...
Page 2
In addition, KATHREIN Digital Systems GmbH reserves the right to change the product and the manual without prior notice. We do not assume any guarantee with regard to the content of this document.
Page 3
TO MINIMISE THE RISK OF ELECTRIC SHOCK, YOU MUST NOT EXPOSE THIS PRODUCT TO WET AND MOIST CONDITIONS AT ANY TIME. All KATHREIN Digital Systems GmbH products are lead-free and meet the requirements stated under the European Directive on the Restriction of Hazardous Substances (RoHS).
Page 4
The CO detector FCM 100 is equipped with a high-quality housing. However, please observe the following safety instructions: • Do not open the housing of the FCM 100. Opening it is dangerous for you and others and will result in the expiration of any warranty claims.
Page 5
Malfunctions and Defects If you notice any kind of defect, remove the batteries from the CO detector FCM 100 and contact your retailer or KATHREIN Digital Systems GmbH directly. Any further usage of the system may lead to fire or electric shock!
Page 6
CO Detector FCM 100 Product description: The CO detector is a sensor that detects the highly toxic carbon monoxide gas and reports reliably and promptly to the alarm panel whenever the natural level is exceeded, which triggers the alarm accordingly. The CO detector is battery-operated and communicates wirelessly with the alarm panel.
Page 7
Range test: To test the signal strength at the desired installation location, perform a range test. 1. Open the alarm panel menu “Sensors” “Range” and press “Start”. 2. Press the Learn button of the CO detector. 3. The sensor and the signal strength should be indicated. The higher the indicated number the better the reception (1 –...
Need help?
Do you have a question about the FCM 100 and is the answer not in the manual?
Questions and answers