Advertisement
Model Number 60ZTSB
60" Zero Turn Mower Snow Blade
Warnings and Safety Precautions
•
Use caution when operating on slopes.
•
Mower traction on snow and ice may vary, use caution.
•
Never leave mower running while adjusting blade.
•
Never put body parts under snow blade while raised.
•
Clear plowing area of all objects and note locations of potential hazards.
•
Snow blade may tilt forward when hitting and object or on uneven pavement. Back up slowly, snow blade
can throw debris back toward operator.
•
Use caution when plowing large amounts of snow. It is a good practice to plow multiple times during large
snow falls.
•
Do not drive into snow piles at high speeds.
•
Check all bolts for tightness before operating snow blade.
Operation Instructions
•
While blade is touching ground, slide adjustment tube (4) vertically, up or down, until rotating lift tube (5) is
horizontal and parallel with ground. Insert bolt (20) and tighten nut (21).
•
To positioning the collar (7) place pin against bottom of side support bracket (6).
•
Adjust plow glides (13) such that the bottom of the blade is approximately 1/2" above ground. Smooth
surfaces require a lower setting or may not require plow glides at all.
•
Adjust foot lift (10), up or down, such that approximately 6-8" of clearance exist on ZTR foot deck. Secure
using bolt (23) in welded nut on the rotating lift tube (5).
•
Begin plowing at a slow speed to insure proper function of all parts.
Tools Required
•
1/2", 9/16", 3/4" and 1-1/8"sockets and / or wrenches.
•
Adjustable wrench.
Ohio Steel Industries
Columbus, OH 43224 U.S.A.
Visit our website: www.ohiosteel.com
For missing parts or questions
Call 1-800-652-2321
60ZTSB - REV A - 10/06
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for OHIOSTEEL Cub Cadet 60ZTSB
- Page 1 Ohio Steel Industries Columbus, OH 43224 U.S.A. Visit our website: www.ohiosteel.com For missing parts or questions Call 1-800-652-2321 Model Number 60ZTSB 60" Zero Turn Mower Snow Blade Warnings and Safety Precautions • Use caution when operating on slopes. • Mower traction on snow and ice may vary, use caution.
- Page 2 Assembly Instructions Snow blade mounting type. Figures 1-4 use step 1a. Figure 5, step 1b, covers installation on Cub Cadet tractors. Assembly for all types is the same past the first step. 1a. Loosely attach adaptor plate (8) to front support bar on tractor using U bolts (19) and 3/8" lock nut (18). Position noched section toward wheel.
- Page 3 Step 3. Figure 7 Attach foot bar (11) to foot lift (10) using 3/8" x 1-3/4" hex bolt (24) and 3/8" lock nut (18). Insert foot lift into front opening of rotating lift bar (5). Then secure using 1/2" pointed bolt (23) and welded nut on rotating lift bar.
- Page 4 United States. When ordering repair parts always give the following information, PRODUCT NAME, MODEL NUMBER, PART NUMBER, and PART DESCRIPTION. For missing parts or questions call 1-800-652-2321 www.ohiosteel.com Page 4...
Need help?
Do you have a question about the Cub Cadet 60ZTSB and is the answer not in the manual?
Questions and answers