MEYLE PLTA Use And Maintenance Instructions

Position Limit Switches PLTA
PLTA is a position limit switch designed to control overhead travelling cranes, hoists and machine
tools. It operates as auxiliary controller of electrical motors through power interfaces, such as contactors or
PLCs.
PLTA is the latest generation of position limit switches: the peculiar design and the use of high
performing polymers ensure high resistance and endurance under the heaviest utilisation conditions.
Its design and overall dimensions facilitate installation and maintenance operations.
Both the enclosure and the head of PLTA are made of thermoplastic material (nylon reinforced
with fi breglass) ensuring wear resistance and protecting the equipment against water and dust. X-type rods
can move to 4 maintained positions.
Inner components are made of tecno-polymers guaranteeing a long life-cycle and constant performance even
at extreme temperatures.
PLTA is equipped with 1NC slow action switches or, upon request, 1NO switches.
All switches are of the positive opening type, thus suitable for safety functions.
Meyer Industrie-Electronic GmbH – MEYLE
Carl-Bosch-Straße 8 Tel.: +49 54 81-9385-0
49525 Lengerich/Germany Fax: +49 54 81-9385-12
PLTA
Internet: www.meyle.de
E-Mail: sales@meyle.de