Download Print this page

Hertz marine HMC U1 Quick Start Manual page 2

Advertisement

INSTALLATION
BEFORE STARTING
1. This device is exclusively for use in vessels with a negative ground 12 V power supply.
2. Read these instructions carefully.
3. Make sure the battery "-" terminal is disconnected before starting.
This is to prevent short circuits during installation. (Figure 1)
INSTALLATION CAUTIONS
1. In order to avoid any interference, do not install the tuner module or control unit in the proximity of
the engine compartment.
2. The use of unauthorized parts can cause permanent damage to the unit.
3. Always check your wire connections to ensure proper installation before turning the unit on.
4. Consult with your nearest dealer for proper installation or if other accessories are needed to
complete the installation.
5. Seek assistance if modifications or drilling holes to your vessel is needed.
6. Do not install the unit where it will be subjected to excessive moisture, dust, dirt, foreign particles or
vibration. Areas of high temperature from the engine, direct sunlight, or heat sources should also be
avoided.
7. Do not install the unit in a location where it will interfere with the vessel operation, or it will injure
the passengers if there is a sudden or emergency stop.
CONTROLS
1
Button
- Mute ON / OFF (short press)
- Power On (short press)
- Power OFF (long press)
2
VOL +/- Button
- Adjust volume level
3
/
Button
- AM/FM/WB/DAB mode: previous/next preset (short press).
- AM/FM mode: SEEK the next/previous strongest station (long press).
- USB/BT mode: previous/next track (short press).
- USB/BT mode: fast forward / rewind (press and hold).
4
Button
- USB/BT mode: PLAY or PAUSE playback (short press).
5
SRC Button
- Short press "SRC" to move to the next option.
5
SRC
4
3
2
1
MUTE
3
Battery
Figure 1

Advertisement

loading