Satco 57-035 Instructions

PLEASE READ AND SAVE THESE INSTRUCTIONS:
1. Remove all parts from packaging and lay on flat surface
before assembling.
2. Unscrew (C) from (A) by allen wrench (D)
next to the transformer.
3. Insert (B) into (A) ,then screw them with screws (C) by
allen wrench (D).
4. Connect the transformer (E) to the cord and plug in.
For best results:
(1) Be sure that curtains, shades, wall hangings, or other similar
materials are not directly touching the top of the lamp shade.
(2) Lamps are not designed to support additional weight; do not
hang items from the lamp shade, the power switch, reading
light arms, or any other fixture on the floor lamp (except if by
design, such as a floor lamp with table).
(3) Place the lamp on a level surface in a location at which it is
unlikely to be bumped against a wall or tipped over by traffic.
(4) The lamp should be cleaned or dusted with a clean, dry cloth.
We do not recommend any abrasives or cleaning solutions.
MAINTENANCE:
LED / 10 Watt (Included)
TRANSFORMER (Included)
CONTEMPORARY
LED DESK LAMP
MODEL # 57-035/ 57-036
in the bag
E
C
D
B
A