Table of Contents
Advertisement
Quick Links
Portfolio
is a registered trademark
®
of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number _________________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5
p.m., EST, Friday.
EB15143
LANTERN POST
WITH CROSSBAR
Purchase Date _________________________
1
ITEM #0013807
MODEL #40193
Français p. 10
Español p. 19
Advertisement
Table of Contents
Related Manuals for LF Portfolio 40193
Summary of Contents for LF Portfolio 40193
- Page 1 LANTERN POST WITH CROSSBAR MODEL #40193 Portfolio is a registered trademark ® of LF, LLC. All Rights Reserved. Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE Serial Number _________________________ Purchase Date _________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m.
-
Page 2: Package Contents
PACKAGE CONTENTS PART DESCRIPTION QUANTITY Lantern Post Crossbar Decorative Ball (preassembled to Crossbar (B)) Photo Eye Female Connector (preassembled to Photo Eye [D]) Male Connector (preassembled to Female Connector [E]) Soft Outlet Gasket (preassembled to Convenience Outlet [H]) Convenience Outlet HARDWARE CONTENTS (shown actual size) Mounting Screw Self-Tapping Screw... -
Page 3: Safety Information
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • Make sure all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199. Hire a qualified electrician or consult a do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring. • This product is for outdoor use only. - Page 4 ASSEMBLY INSTRUCTIONS Important: Before you begin this procedure and dig the necessary holes required to install the item, consult your local electrical codes. 12 - 15 in. 1. Dig a hole 12 in. to 15 in. in diameter and 18 in. in Trench depth, allowing extra depth for added gravel (not included).
- Page 5 ASSEMBLY INSTRUCTIONS 4. Remove the decorative ball (C) from one end of the crossbar (B). Insert the crossbar (B) through both 3/4 in. diameter holes in the lantern post (A). Re-attach the decorative balls (C) and position the crossbar (B) as desired.
- Page 6 ASSEMBLY INSTRUCTIONS 7. Route the wires from the convenience outlet (H) through the empty hole and out the hole with the supply and lantern wires. 8. Connect with supply, light fixture, convenience outlet (H) and male connector (F) wires according to the Wires from diagram and these steps: Convenience a.
- Page 7 ASSEMBLY INSTRUCTIONS 10. Gently push the wires and wire connectors (CC) into the pole. Hardware Used Wire Connector Light Fixture 11. Secure the convenience outlet (H) to the lantern post (A) using the self-tapping screws (BB) and tighten with a Phillips screwdriver (not included). Hardware Used Self-Tapping Screw...
-
Page 8: Care And Maintenance
ASSEMBLY INSTRUCTIONS 13. Once the lantern post (A) is completely assembled, 4 13 secure the lantern post (A) into the hole with concrete (not included). Note: Ensure the bottom of the lantern post (A) is embedded in the gravel and is level before pouring the concrete up to just below the inlet hole. -
Page 9: Limited Lifetime Warranty
Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday. PART DESCRIPTION PART # Decorative Ball 0013807-C Photo Eye 0013807-D Convenience Outlet 0013807-H Hardware Kit 0013807-HW Printed in China ® Portfolio is a registered trademark of LF, LLC. All Rights Reserved. 9047 • 031715...
Need help?
Do you have a question about the Portfolio 40193 and is the answer not in the manual?
Questions and answers