Page 2
1IASBOX - TECHNICAL MANUAL FOREWORD FOR THE INSTALLER: Please follow carefully the specifications relative to electric and security systems realization further to the manufactu- rer’s prescriptions indicated in the manual provided. Provide the user the necessary indication for use and system’s limitations, specifying that there exist precise specifi- cations and different safety performances levels that should be proportioned to the user needs.
Page 3
LED will blink green. The loop is connected to the AS protocol via SIG and -S terminals. This connection does not require an external power supply unit. 1IASBOX module is supplied with a reduced-dimension plastic housing and is also suitable to be installed on 503- type flush-mount boxes.
Page 4
1IASBOX - TECHNICAL MANUAL 4. OVERVIEW AND WIRING DIAGRAM WARNING: during wiring and installation procedure, make sure panel and loop are disconnected from power. www.acornfiresecurity.com...
Page 5
BOX COVER 6. ID ADDRESS SETUP The setup procedure of 1IASBOX module ID address is very easy: it is equipped with three rotary dip switches corresponding, respectively, to hundreds (x100), tens (x10), and units (x1) of the code to set.
Page 6
Not used. 8. DISPOSAL INSTRUCTIONS Dispose of analogue addressable module 1IASBOX in compliance with current city regulations and by lea- ving the device in a dumping ground that is authorized for the disposal of electronic products. If required, please contact the appropriate city office for additional information.
Need help?
Do you have a question about the 1IASBOX and is the answer not in the manual?
Questions and answers