Summary of Contents for SereneLife SLBSMPMP50
- Page 1 SLBSMPMP50 - SLBSMPMP50.9 - SLBSMPMP100 Submersible Clean/Dirty Water Pump Powerful Sump Pump, 1980 GPH, Auto Float Switch with 16 ft. Power Cord Length...
-
Page 2: Safety First
APPLICATION This pump is used primarily as cellar pump. When installed in a shaft, the pump provides protection from ooding. It is also used wherever water has to be moved from one place to another, e.g. in the home, agriculture, horticulture, plumbing and many other applications. -
Page 3: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, re and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool. -
Page 4: Parts Description
35°C or 95°F. This pump may not be used for other uids, especially motor fuels, cleaning uids, and other chemical products! PARTS DESCRIPTION Motor housing 2. Water inlet 3. Water outlet Cable & plug Floating switch Carrying handle SLBSMPMP50 and SLBSMPMP50.9 SLBSMPMP100 www.SereneLifeHome.com... -
Page 5: Mains Supply
INSTALLATION The submersible pump is installed as follows: • In a stationary position with xed pipeline. • In a stationary position with a exible hose pipe. Please note! You should never install the pump by suspending it unsupported from its delivery pipe or power cable. -
Page 6: Cleaning And Maintenance
VENTING THE PUMP BEFORE USE Always ensure that the pump is vented property before commissioning the pump. Possibly tilting back and forth several times until no more air bubbles appear, wait at least 15 seconds before the pump to start. SETTING THE ON/OFF OPERATING POINT The ON and OFF operating point of the oat switch can be set by adjusting the oat switch in its latching holder. -
Page 7: Cleaning The Impeller
Remove the mains plug before all maintenance work. • When the pump is often transported in the course of operation, it should be cleaned outwith clear water after every use. • In case of stationary installation, the function of the bating switch should be checked every3 months. -
Page 8: Troubleshooting
• Make sure that a water after short operation • water too hot, thermal- period temperature of max. 35°C cutout stops pumping (95°F) is not exceed MODEL SLBSMPMP50.9 SLBSMPMP50 SLBSMPMP100 Power Supply 400W (0.5HP) 400W (0.5HP) 750W (1HP) 1,980 gallon/... -
Page 9: What's In The Box
FEATURES: • Compatible with Flat PVC Hose in 0.98’’ and 1.26’’ inches • Screw Thread in NPT1-1/4’’ and NPT5/8’’ • Auto Float Switch: Start/Stop Automatically • Rugged and High-Quality Materials • Designed and Manufactures with Valid Safety Requirements • Lower Noise and Energy-E cient •... - Page 10 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...
Need help?
Do you have a question about the SLBSMPMP50 and is the answer not in the manual?
Questions and answers