KEDSUM Professional Electric Nail Drill Quick Start Manual

KEDSUM Professional Electric Nail Drill Kit
Thanks for purchasing the KEDSUM professional electric nail drill,hope you will have a good
shopping experience, pls read this manual carefully before usage.

1.How to use:

1).Choose the drill bits you need
2).There is a twist button (the friction part) in the middle of the drill handle,turn it to the left to
remove the original bits,insert the bits your need and turn it back,it will hold the drill bit in place
3).Turn the Off/Forward/Reverse button to the middle side to turn off the unit
4).Plug the adapter into the drill
5).Plug another side of the adapter into the wall outlet
6).Turn the Off/Forward/Reverse button to the left side to choose Forward direction,or turn it to
the right side to choose Reverse direction
7).Choose the speed you need from the speed dial
8).Enjoy your nail salon at home
9)When finished, turn the Off/Forward/Reverse button to the middle side to turn off the unit

2. How to remove or insert the drill bits into the handle piece:

1) Turn the twist button (the friction part) to left side until hear "beep" clicking sound, the chuck
[the handle piece] is open
2) Plug off the original bit
3) Insert one new bit
4) Turn it to right side to fix the bit and prevent it from flying out during using.
Please Note: Patterns metal part which is marked by red square circle shown as the following
picture.