Advertisement
Functions
Status
Aoto green light
Green light
Red light
White light
Air quality indicator light
Product Operation Method
Purification Function
1. Open the magnetic upper cover of the purifier and install the strainer into the
purifier.
2. Supply power to the purifier with USB sable and place it in a suitable position in
the car.
3. Tap [AUTO] or [PURIFY] button to turn on the purification function.
Humidification Function
1. Open the silica gel plug of the water tank at the bottom of the purifier.
2. Add tap water or mineral water into the water tank.
3. Power the appliance and tap the [HUMIDIFY] button to turn on the humidification
function.
Note: When the purification and humidification functions are enabled at the same time,
there may be slight water accumulation of the product surface due to external factors.
Please take care of that and wipe it off so as not to affect the normal use of the
humidification function. Humidification works every three seconds by default.
Function
Indicated that the intelligent automatic level is turned on, and the
purification level can be automatically switched according to the air
quality.
The green light indicates that the purification Level 1 mode is on, at
which time the air quality indicator light slowly breathes and blinks.
The red light indicated that the purification Level 2 mode
(enhanced mode) is on and the air quality indicator light breathes
and blinks quickly.
The white light indicates the humidification mode is on.
The green light of the air quality indicator light blinks, which
indicates the excellent air quality; the red light flashes, which
indicates the poor air quality.
3
Advertisement
