Advertisement
ISO 9001 ed. 2000
M . M . T . s.r.l.
Certificato n° 229
www.mmtitalia.com
395
MECHANICAL DIMENSIONS
ORDER CODE
CODE
395-000-00
stainless steel AISI 303 L= 65mm 1/2" stainless steel
395-001-00
stainless steel AISI 303 L= 65mm 3/8" stainless steel
395-040-00
stainless steel AISI 303 L= 500mm 1/2" stainless steel
395-041-00
stainless steel AISI 303 L= 500mm 3/8" stainless steel
395-044-00 stainless steel AISI 303 L= 1000mm 1/2" stainless steel
395-045-00 stainless steel AISI 303 L= 1000mm 3/8" stainless steel
CODE
999-021-00
A
999-003-00
B
Electrode stainless steel AISI 304 L=1mt D=5,2mm
999-014-00
C
999-012-00
D
Jointing nut 6MA x 6MA stainless steel
Information provided herein can be changed without notice.
00335501
26010 CAPRALBA (CR) - ITALY - Via degli Artigiani, 56 tel. 0373 450595 - fax. 0373 450728
SINGLE ELECTRODE-HOLDER
ELECTRODE
ACCESSORY
DESCRIPTION
Protection coprinylon
Nut 6MA stainless steel
TECHNICAL CHARACTERISTICS
•
Sensor working: conductive
•
Probe body: stainless steel – AISI 303
•
Insulator: allumina (Al
•
Thread: 1/2" GAS
•
Electrode: stainless steel AISI 303
•
Temperature:
•
Pressure: 25 bar
•
Protection class: IP40 with protection (option)
•
Weight: 100 g
THREAD
e-mail: info@mmtitalia.com
O
)
2
3
ø
6MA L=65mm
250°C
on the electrode
[395_000_00_E_CAT.doc]
mag - 09
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MMT 395
Summary of Contents for MMT 395
- Page 1 AISI 303 L= 500mm 1/2“ stainless steel 395-041-00 stainless steel AISI 303 L= 500mm 3/8” stainless steel 395-044-00 stainless steel AISI 303 L= 1000mm 1/2“ stainless steel 395-045-00 stainless steel AISI 303 L= 1000mm 3/8” stainless steel ACCESSORY...
- Page 2 They are particularly useful in boilers and steam generators. junction length. The level switches to be used together with the electrode-holder series 395, are all of our The switching point is at the lower end of the electrode. products of the series 200 and 201 (delayed).
- Page 3 The electrode-holder must be handled with care; it doesn't have to suffer drop or impact. A drop could break the internal ceramics, without notice by visual examination; in case of drop, do not use the electrode-holder, but return it to MMT for a check/test. For the assembling, refer to the following drawing: Fig.4...
Need help?
Do you have a question about the 395 and is the answer not in the manual?
Questions and answers