CLEARVIEW PANELS ™ ASSEMBLY PROCEDURE Following the instructions as presented will help ensure the proper assembly. Failing to follow these steps may result in an improper assembly and will void all warranty and protection the owner is entitled. The steps outlining the assembly process are as follows: YOU MUST READ THIS DOCUMENT BEFORE YOU BEGIN TO ASSEMBLE THE PANEL.
CLEARVIEW PANELS ™ REQUIRED TOOLS NOTICE: Accessories are sold The following list identifies the tools and equipment needed separately. Ask your sales associate for to assemble the panel. Additional tools and supports may details. be needed depending on the location, and application. •...
Page 4
CLEARVIEW PANELS ™ HANG THE PANEL USING SCREW HOOKS Gather the Tools and Materials • Screw hooks • Drill bit • Variable speed drill • Snugger tie-downs • Tek screws • Fender washers ClearView Panel Drill pilot holes along the straight line where the ™...
CLEARVIEW PANELS ™ Attach the sides of the panel using screws with Attach the sides of the panel to the frame using washers for a more permanent installation. snugger tie-downs if you want to remove the panel periodically. NOTE: If the frame is metal, use a self-drilling Tek screw with a fender washer.