Sony PCG-FRV26 VAIO User Guide (primary manual) User Manual page 81

Connecting a floppy disk drive
You can connect a floppy disk drive when your computer is on or off. Connecting the drive when the computer is in a power
saving mode (Standby or Hibernate) may cause the computer to malfunction.
To connect a USB floppy disk drive
1.
Close any active programs to prevent data loss.
2. Plug the USB cable (with the USB icon
pop-up message appears.
Connecting a Floppy Disk Driv e
facing upward) into the USB port . The Found New Hardware
Page 81