Disconnecting a floppy disk drive
You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in
a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
To disconnect the drive while the computer is on
1.
Double-click the Safely Remove Hardware icon
appears.
2.
Click to select the floppy drive in the Hardware devices window, if it is not already selected.
3.
Click Stop. The Stop a Hardware device window appears.
4.
Make sure the floppy drive is selected, and click OK. A message appears, stating it is safe to remove the
hardware device.
on the taskbar. The Safely Remove Hardware dialog box
Page 84
Need help?
Do you have a question about the PCG-FRV23 VAIO User Guide (primary manual) and is the answer not in the manual?