Related Manuals for Bushnell ImageView 78-7348
Summary of Contents for Bushnell ImageView 78-7348
- Page 1 15-45x50mm Spotting Scope with Digital Camera Model: 78-7348 LIT. #: 98-0468/09-04...
-
Page 2: Software Installation
Congratulations on your purchase of the Bushnell ImageView ® spotting scope! The Bushnell ImageView spotting scope takes the technology of digital photography and combines it with a high-quality compact spotting scope. This allows you to observe sporting events, wildlife, scenic vistas or anything you would normally use a spotting scope for, and then save the image in a built-in attached digital camera. - Page 3 CAMERA OPERATION INSTRUCTIONS A. Button Descriptions a. The MODE button has three functions: 1. Power on: Press and hold button until camera turns on. When camera is connected to a PC via the USB cable provided, the camera will power on automatically 2.
- Page 4 OPERATION GUIDE 1. The camera is powered by two "AAA" batteries (not included) or USB power (via PC connection) 2. Insert two AAA alkaline batteries into battery compartment 3. Press and hold MODE button until camera turns on. 4. Press SNAP to take a picture, or press MODE button quickly to change mode settings as described above.
- Page 5 12. To enter "Low Resolution" mode, which will cause your pictures to be of a lower resolution, but will also allow you to store many more pictures in the camera’s memory, press the MODE button 3 times until you see the "LQ" icon blinking. Press the SNAP button to select this mode.
- Page 6 Click “Transfer” in the left frame area under “Home Page” Select “Transfer from new device” Under (#1) “Select a device from the list”, click “Bushnell Imageview”, then click “Next” at the bottom of the left frame area. You may now name the group of photos if you wish (#2), or accept the default “Captured (current date).
-
Page 7: Using The Tripod
SPOTTING SCOPE INSTRUCTIONS MOUNTING Remove the spotting scope from the packaging. Attach the tripod with the provided screw to the tripod mount hole located on the base of the spotting scope. Spread the tripod legs and set on a solid surface. MAGNIFICATION To "zoom"... -
Page 8: Two-Year Limited Warranty
This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department. Any return made under this warranty must be accompanied by the items listed below: A check/money order in the amount of $10.00 to cover the cost of postage and handling... - Page 9 Addendum REMOTE SHUTTER CABLE Whenever possible, using the included remote shutter release cable is recommended to avoid accidentally jarring the camera when the SNAP button is pressed. Due to the high magnification of the camera, any motion when the shutter is open can result in photos with a blurred or shaky appearance.