Next 658961 Assembly Instructions Manual

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or
require any replacement fittings please contact
Customer Services Tel: 0844 844 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original
packaging

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instruc
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• Wall fixings are not included.
• The maximum load this shelf/these shelves can hold is 5 kg.
• We would recommend that the following methods to be used to hang the cabinet. NB - Screws & Raw plugs
for the wall are not included.

PRODUCT INFORMATION

• Wood from MDF with a painted finish.
• Made in China.

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer
finish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if
necessary.
• Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will
scratch the glass.
658961 SPARKLE TALL CABINET
ASSEMBLY INSTRUCTIONS.
Page 1 of 6