Advertisement
A
SSEMBLY
I
NSTRUCTIONS
Assembly Instructions for F2008, F2010 Picnic Table
To prevent scratching on any of the finished pieces, we recommend assembling the unit on packing
material (paper and cardboard). Do not drag assembled unit on any surface. The assembly is a 2
For cleaning, use mild household cleansers or soap and water.
Parts List
2 – Table Supports
2 – Seats
2 – Cross Braces
1 – Table Top
Table Supports
ASI 133A HRD3
person operation.
Cleaning Recommendations
Do not use vinyl cleansers or protectants.
Hardware Included
16 – 5/16" x 1 ¼" Bolts
16 – 5/16" Nuts
32 – Washers
4 – Rubber Feet
Cross Braces
211 N. Lindbergh Blvd. • St. Louis, MO 63131-7809
Tools Needed
Ratchet with a ½" socket
½" Wrench
Rubber Mallet
Level
Seats
Table Top
800-231-1327 • www.landscapebrands.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Landscape Fusion F2008
Summary of Contents for Landscape Fusion F2008
- Page 1 SSEMBLY NSTRUCTIONS Assembly Instructions for F2008, F2010 Picnic Table To prevent scratching on any of the finished pieces, we recommend assembling the unit on packing material (paper and cardboard). Do not drag assembled unit on any surface. The assembly is a 2 person operation.
- Page 2 SSEMBLY NSTRUCTIONS Diagram #1 Diagram #2 Note: Before assembling nuts onto bolts, we recommend that a light oil or petroleum jelly be applied to the bolt threads. 1. Place table top on packing material, upside down. 2. Align table support with table top holes, as shown in Diagram #1. 3.
Need help?
Do you have a question about the F2008 and is the answer not in the manual?
Questions and answers