Management - Acer X1110 Series User Manual

Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
•
•
If you forget your administrator password, do the following
to retrieve the administrator password:
•
•
Selecting "On" enables the function. The projector can output
VGA OUT
a VGA signal when it is in standby mode and the VGA IN (or
(Standby)
VGA IN 1) and VGA OUT sockets are correctly connected to the
(for X1110A/
devices.
X1210/X1210A/
X1210K/X1210S/
X1213/X1216)
Press
Reset
parameters on all menus to the factory default settings.

Management

Choose "On" to dim the projector lamp, which will also
ECO Mode
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
Press to change "Administrator Password".
The factory default of "Administrator Password" is
"1234".
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
If the Security Card is lost, please contact your local Acer
service center.
Enabling this function slightly increases the standby
power consumption.
after choosing "Yes" to return the display
25