Advertisement
PARTS
ASSEMBLY
1. Thread the Lower Pole [14] through the Base
Plate [15] and secure with the Nut [16]
2. Attach Motor Housing [9] onto Extension
Pole [12] and secure with Fixing Screw [11]
3. Place Rear Grille [5] on Motor Housing [9]
aligning with rear posts, and secure with Nut
[4]
4. Attach Fan Blade [3] onto Fixing Point [6]
and secure with Cap [2]
5. Clip Front Grille [1] onto Rear Grille [5] using
attached clips, and screw in Securing Screw
[17] Screw Hole on the Front Grille should
be on the bottom.
OSCILLATION
Press the switch on the rear of the fan to engage the oscillation feature.
ZNMPF1601
SETTINGS
1.
Front Grille
2.
Fan Blade Securing Cap
3.
Fan Blade
4.
Rear Grille Securing Nut
5.
Rear Grille
6.
Fan Blade Fixing Point
7.
Speed Adjustment Dial
8.
Oscillation Switch
9.
Motor Housing
10. Power Cord & Plug
11. Housing Fixing Screw
12. Extension Pole
13. Extension Screw
14. Lower Pole
15. Fan Base Plate
16. Base Plate Securing Nut
17. Grille Securing Screw
Revision 3.1
Advertisement
