Page 2
In the event this product malfunctions or customer believes it is defective, the customer should contact Customer Service and retain the defective product pending further instructions. Defective product should be clearly marked or stored where it cannot be used again by mistake. Failure to retain the product may impede hOme ™...
TABLE OF CONTENTS Important Safety Instructions Installation Operating Instructions 9-10 Cleaning and Maintenance 11-12 Troubleshooting Warranty Manufacturing Info Warning Contact Us...
Page 5
Congratulations on bringing home your new appliance! Don’t forget to register your product at homelabs.com/reg for updates, coupons, and other relevant information. Although greatly appreciated, product registration is not required to activate any warranty.
Important Safety Instructions • READ ALL INSTRUCTIONS BEFORE USING AND KEEP IT FOR FUTURE REFERENCE. • Do not open or repair the unit by any unqualified person. • To protect against electric shock, keep the unit dry. Do not immerse the unit in water or any other liquid.
Page 7
Important Safety Instructions FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Installation Accessories Accessory name Quantity (pcs) Remote control Instruction manual Caster with brake Caster without brake AAA battery Place the evaporative cooler 1. Pull the unit outwards from the carton and place it on a solid hot-proof horizontal surface. 2. Check if the accessories are complete, same as the accessories list. 3.
Operating Instructions Component Description Filtration mesh Water evaporation Control panel Outlet of air flow Front cabinet Back cabinet Caster Water tank ater level window Install the remote control batteries Open the battery compartment cover and insert 2 AAA batteries into battery compartment of the remote control, making sure the battery polarities are correct.
Page 10
Operating Instructions 1. ON/OFF: Press this button to turn on or turn off the unit. For first time of use, the unit start up with middle fan speed within 3 seconds and then work under low fan speed. 2. Speed: Press this button to switch the fan speed in sequence of LOW, MID, HIGH and LOW. At the same time the display shows 1, 2, 3.
Cleaning and Maintenance Always disconnect the unit before any cleaning or maintenance. Do not use petrol, toluol, etc to clean the unit body. For slight dirt on the body, wipe it off with a soft damp cloth. For greasy dirt, squeeze a little toothpaste or mild detergent on a soft damp cloth, and then wipe the dirt off.
Page 12
Cleaning and Maintenance Clean the evaporator 1. Pull out the plug from the wall outlet. 2. Catch the filtration mesh handle and move it out. 3. Remove the screw and move out the evaporator. 4. Clean the evaporator with mild detergent and water. 5.
Troubleshooting If there is something wrong during operation, it may not be the unit’s problem. You may check against the following list before sending for repairing. Problems Possible reasons Solutions Not working 1. The plug is not securely inserted 1. Insert the plug pin into the outlet into the outlet.
A receipt indicating the purchase date is required for any claim, so please keep all receipts in a safe place. We recommend that you register your product on our website, homelabs.com/reg. Although greatly appreciated, the product registration is not required to activate any warranty and product registration does not eliminate the need for the original proof of purchase.
Need help?
Do you have a question about the HME020396N and is the answer not in the manual?
Questions and answers
need new pads for this unit where can i get them