Schuller 793971GD Assembling Instructions

Dimmable item

Advertisement

ATENCIÓN: Schuller recomienda que utilice los balancines suministrados en la instalación de esta lámpara.
ATTENTION: Schuller recommends to use included special screws when installing this lamp.
1
2
4
Retirar la pieza de plástico y desplazar
la conexión al interior del plafón
Remove plastic piece and move the
connection to the inside of the canopy,
ATENCIÓN
Nunca conectar de forma distinta a la indicada.
Si se alteran los vatios, se fundirán los LEDS
WARNING
Never connect the cables in a different way
than the recommended way. If watts are
altered, Leds will fuse.
Este producto incluye drivers led con dimado de tipo 0-10V o PWM, un receptor y un mando a distancia
por radiofrecuencia. Para utilizar con regulador de pared, usar sólo dimmers de estos dos tipos de
regulación. El uso de otro tipo de dimado dañaría el driver led. El receptor instalado en el producto tiene
seleccionado el canal número 1. Use este mismo canal en el mando a distancia.
This product includes LED drivers with 0-10V or PWM dimmers, a receiver and a radio frequency remote
control. To use with wall control, use only dimmers of these two types. Any other type would damage the
LED driver. The receiver installed in the product has channel 1 selected. Use this channel also on the
remote control.
INTEGRATED LED:
LED INTEGRADO /
INSTRUCCIONES DE MONTAJE
ASSEMBLING INSTRUCTIONS
ARTÍCULO/
MODELO DIMABLE /
3
27 Leds 147,6W 10.330lm. 3.000K.
ITEM
: 793971GD
2
4
ATENCIÓN
WARNING

DIMMABLE ITEM

5
Rev. 12.20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 793971GD and is the answer not in the manual?

Questions and answers

Summary of Contents for Schuller 793971GD

  • Page 1 : 793971GD DIMMABLE ITEM MODELO DIMABLE / ATENCIÓN: Schuller recomienda que utilice los balancines suministrados en la instalación de esta lámpara. ATTENTION: Schuller recommends to use included special screws when installing this lamp. Retirar la pieza de plástico y desplazar la conexión al interior del plafón...
  • Page 2 INSTRUCCIONES DE MONTAJE ASSEMBLING INSTRUCTIONS ITEM ARTÍCULO/ : 793971GD DIMMABLE ITEM MODELO DIMABLE / NOTA IMPORTANTE El montaje y la manipulación de este artículo debe hacerse entre dos personas. IMPORTANT NOTE The assembly of this table must be done by two people...
  • Page 3 NOTA SCHULLER RECOMIENDA LA COLOCACIÓN DE PROTECTORES DE SOBRETENSIÓN PARA EVITAR LOS DAÑOS EN LOS COMPONENTES ELECTRÓNICOS DE LA LUMINARIA LED. NOTE SCHULLER RECOMMENDS TO PLACE SURGE PROTECTORS TO AVOID DAMAGES TO THE ELECTRONIC COMPONENTS OF THE LED LUMINAIRE. Disponibles en nuestro catálogo...

Table of Contents