Advertisement
Advertisement
Summary of Contents for SGS MT-1200-2
- Page 2 MD-1200-1 ME-1200-1 MK-1200-D ME 1200...
-
Page 3: Table Of Contents
CONTENTS ISSUES COVER CONTENTS PRESENTATION TECHNICIAL SPECIFICATIONS ELECTRIC SCHEME WARNING SIGNS 10-11 PRODUCT LABEL INFORMATION SAFETY WITH DETAILS HANDLING AND RELOCATION 14-20 USING THE DEVICE, CLEANING AND MAINTENANCE WARRANTY CONDITIONS 22-25 EXPLODED VIEW / SPARE PART LIST CE DECLARATION... -
Page 4: Presentation
PRESENTATION Hi there, We thank you for your confidence in choosing our device and our company. Our devices are used in 60 countries around the industrial kitchen with you. Our device is manufactured in accordance with international standards. To receive output from the device to your expectations, and certainly you read the manual to use long-term, we strongly advise users to your instructor. -
Page 5: Technicial Specifications
TECHNICIAL SPECIFICATIONS MODEL MT-800-2 MD-800-2 MD-800-1 ME 800 EXTERIOR DIMENSIONS 126 X 102 x 205 126 x 102 x 185 126 x 102 x 185 126 x 102 x 40 (x-y-z cm) INTERNAL DIMENSIONS 3 PIECES 2 PIECES 2 PIECES 1 PIECE (X-y-z cm) 84 x 84 x 18... - Page 6 TECHNICIAL SPECIFICATIONS MODEL MT-1200-2 MD-1200-2 MD-1200-1 ME-1200_1 ME 1200 EXTERIOR 166 x 102 x 205 166 x 102 x 185 166 x 102 x 185 166 x 102 x 165 166 x 102 x 40 DIMENSIONS (x-y-z cm) INTERNAL 3 PIECES...
- Page 7 STRAIGHT POWER SCHEME...
-
Page 8: Electric Scheme
STEAM ELECTRIC SCHEME... -
Page 9: Warning Signs
WARNING SIGNS GROUNDING NETWORK PROTECTION GROUNDING ELECTRICITY HIGH TEMPERATURE ELECTRICAL CONNECTION VALUES 380V -400V / 50/60 Hz Voltage : 380 V - 400 V Network Access : 380-400 V 3 NPE Terrestrial Trunked Frequency: 50 / 60Hz. -
Page 10: Product Label Information
PRODUCT LABEL INFORMATION... - Page 11 PRODUCT LABEL INFORMATION...
-
Page 12: Safety With Details
SAFETY WITH DETAILS ☞ Solid and liquid combustible materials of all kinds in the area where the device is working (clothing, alcohol and derivatives, petro - chemical products, wood and plastic, curtains, etc.) should not be taken. ☞ Do not clean with pressurized water. ☞... -
Page 13: Handling And Relocation
HANDLING AND RELOCATION The device should never be operated under the hood. solid and liquid combustible materials of all kinds in the area where the device is working (clothing, alcohol and derivatives, petro - chemical products, wood and plastic, curtains, etc.) should not be taken. - Page 14 USING THE DEVICE CONTROL BOARD ATTENTION ! : APPLIANCE NEVER OPERATE from your GROUND CONNECTING LINE 1. TEMPERATURE SET INCREASE AND DECREASE KEY INDICATOR: Shows the set temperature setpoint. Setpoint adjustment range of 400ºC to 70ºC "+" and "-" keys can be done with. If the increase and decrease buttons are held down for 3 seconds increases or decreases the value quickly.
- Page 15 USING THE DEVICE 5. LIGHTING CONTROL KEY AND LED: LED lights when pressed, allows the lamp relay output. LED turns off when the button is pressed again, it does not relay outputs. 6. TURBO BUTTON AND LED: Key LED lights up when the key is pressed, all the resistance is started full operation is activated.
- Page 16 USING THE DEVICE Introduction hidden functions and settings: To enter the secret function when the device is not in the start position lamp button is pressed for 3 seconds. Thus, the temperature parameter menu appears in the display. Blink Set the value to be set in the indicator flashes, the temperature indicator "Pr.1"...
- Page 17 USING THE DEVICE Pr.1: When the Start button is pressed, the measured temperature is below the setpoint value device operates in turbo mode automatically based on these parameters. All resistances measured temperature value is below the set temperature until the value in this parameter is active.
- Page 18 USING THE DEVICE Oven control devices hidden parameters of the factory is as follows. Pr.1: 40 ° C (temperature will remain off how much of a turbo under the set point in the first study) Pr.2: 9 min (first study period to wait when the turbo is disabled) Pr.3: -5ºC (Upper hysteresis value) PR.4: 0ºC (lower hysteresis value) Pr.5: 40ºC (activating the cooling fan girecig oven temperature)
- Page 19 USING THE DEVICE Instruction manual The device before first use, the outer surface dipped in warm soapy water, cleaned with a cloth wrung. Turn the power switch Thermostat (250 ° C-300 ° C) set. (Green light will illuminate). Products may occur when you run an odor originating from the first insulation and heating elements.
- Page 20 When faced with the situation of our call center Do let me know. When EQUIPMENT FAILURE RESPONSE ONLY POWERS AUTHORIZED SERVICE Sgs Oven these. Authorized Service of EXCEPT FOR A TECHNICAL STAFF MEMBER OR incompetent THE UNIT INTERVENTION DEVICE WARRANTY WILL REMAIN OUTSIDE.
- Page 21 1) The warranty period starts from the date of delivery and 2 years. 2) the goods are under guarantee of our firm, including all parts. 3) In case of defects within the warranty period, it added to the warranty period repair. The repair time is up to 20 business days.
Need help?
Do you have a question about the MT-1200-2 and is the answer not in the manual?
Questions and answers