Table of Contents
Advertisement
Quick Links
Operation, Assembly & Maintenance Manual
Congratulations on your purchase and thank you for selecting the AutoSparge
Engineering. We are confident that it will provide you years of service and many gallons of outstanding beer. This manual
will familiarize you with the assembly and use of the lauter tun level control.
**** PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION ****
IMPORTANT !!
Caution:
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of the
equipment. Please read these sections thoroughly. If you have any questions, contact your retailer or
Blichmann Engineering (www.BlichmannEngineering.com) before use.
Warning:
Sections labeled "Warning" can lead to serious injury or death if not followed. Please read these
thoroughly and understand them completely before use. If you do not understand them or have any
questions, contact your retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use.
Assembly & Installation:
Ensure you have all the parts included in Fig. 1. This product is shipped disassembled. Please contact your Retailer if any
parts are missing.
Fig. 1
AutoSparge
lauter tun level control from Blichmann
TM
Installing the Float Ball
Pinch hose
Pull hose
Push hose in ball
Ready to use
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Blichmann Engineering AutoSparge
Summary of Contents for Blichmann Engineering AutoSparge
- Page 1 AutoSparge Operation, Assembly & Maintenance Manual Congratulations on your purchase and thank you for selecting the AutoSparge lauter tun level control from Blichmann Engineering. We are confident that it will provide you years of service and many gallons of outstanding beer. This manual will familiarize you with the assembly and use of the lauter tun level control.
- Page 2 7/8” hole will also work, but is a bit on the big side. Installation in a brew pot: Blichmann Engineering offers a punching service for BoilerMaker pots for a nominal fee when purchased new from the factory. We do not punch other pots, or accept pots back to us for punching. We offer 6 different locations to accommodate your installation.
- Page 3 10 gal Rubbermaid cooler. (7) At this time, install your preferred hose fitting. Shown here is a Blichmann Engineering QuickConnector . But any ½” NPT connector will work. This concludes the installation instructions for your AutoSparge lauter tun level control.
- Page 4 Fig. 3 Connect the hot liquor to the inlet of the AutoSparge (the ½” NPT end) via gravity feed or with a pump. Do not exceed 10 PSI to prevent leaking past the float valve.
- Page 5 A. Limited Warranty Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required. Blichmann Engineering’s obligation to repair or replace defective materials or workmanship is the sole obligation of Blichmann Engineering under this limited warranty.
- Page 6 Any implied warranty that is found to arise by way of state or federal law, including any implied warranty of merchantability or any implied warranty of fitness, is limited in duration to the terms of this limited warranty and is limited in scope of coverage to this warranty. Blichmann Engineering disclaims any express or implied warranty, including any implied warranty of fitness for a particular purpose or merchantability, on items excluded from coverage as set forth in this limited warranty.
Need help?
Do you have a question about the AutoSparge and is the answer not in the manual?
Questions and answers