1. Manuals
  2. Brands
  3. Logic Manuals
  4. Farm Equipment
  5. SURFACE PRO LSP150P
  6. User manual

Logic SURFACE PRO LSP150P User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LSP150P
SURFACE PRO
USER MANUAL
WM2-LSP150P

Advertisement

Table of Contents
loading

Summary of Contents for Logic SURFACE PRO LSP150P

  • Page 1 LSP150P SURFACE PRO USER MANUAL WM2-LSP150P...
  • Page 2 Roller adjustment and depth control Tine adjustment 14-15 Levelling board Drawbar adjustment Operating speed Optional perimeter plough Harrowing all weather arenas Maintenance / service Specification Parts diagrams and List Logic Manufacturing product owner guarantee Declaration of conformity Pro-Harrow Serial Number: Date of Purchase:...
  • Page 3 INTRODUCTION With the purchase of your LSP150P LOGIC SURFACE PRO you have made an excellent choice. This machine should give first class service for a long time, if used correctly, and maintained as described in this manual. Many of today's arenas contain synthetic surfaces incorporating mixed fibres, washed silica sand and waxed coatings to provide a stable, dynamic and evenly compacted surface.

  • Page 9: Safety First

    ATVs The Logic Surface Pro is not suitable for use with ATVs with less than 300cc engine capacity or for use with leisure or sports models. 4 wheel drive vehicles are recommended. Using an ATV with an attachment introduces additional risks to operating an ATV alone, these should be thoroughly assessed and managed.
  • Page 10 Brakes can have a relatively short life in the environment the machine will be used, so frequent • cleaning, regular adjustment and proper maintenance will be required. The Logic Surface Pro is unbraked so the towing vehicle is relied upon to provide the control. Check the towing vehicles manufacturers manual for further guidance.
  • Page 11 INSTRUCTIONS / WARNING DECALS / STICKERS The above decals should be located on your LSP150P. If any of the above decals are not ! ! ! ! located on your LSH200P or are damaged in any way contact Logic for some replacement decals before use.

  • Page 12: Transport Lifting And Storage

    TRANSPORT LIFTING AND STORAGE Ensure the vehicle used to lift and transport the harrow has the necessary lifting and loading capacity. Follow all vehicle manufacturer’s guidelines for lifting. When lifting the LSP150P for transporting/ delivery purposes always ensure to locate the lifting straps on each of the four corners ensuring the straps/chains are all the same length before lifting, or if using forklift tines ensure the harrow is secure on the tines before lifting.
  • Page 13 5.2 CONTROL BOX ATTACHING TO THE TOWING VEHICLE Remove the control box kit from its packaging and lay out on the ground. Take the control box and mount it to the towing vehicle in a reachable place from the operator. Route the power supply cable to the towing vehicle battery.

  • Page 14: Tine Adjustment

    5.4 TINE ADJUSTMENT The aggressiveness of the tines on the ground is controlled by the adjustment handle located at the front of the machine. See figure 3. Figure 3 The tines have three settings which are designed to give the optimum effect on the ground with the users desired vehicle.

  • Page 15: Levelling Board

    ADJUSTING THE TINES Lift the harrow into its transport position. Pull out the spring locking pin located on the adjustment handle at the front of the machine. Move the adjustment handle to the desired setting. Ensure that the spring pin locks the tines in the desired setting. Lower the machine into the work position.

  • Page 16: Operating Speed

    5.7 OPERATING SPEED FORWARD SPEED In general the LSP150P works best at speed in order to create a vibrating effect with the tines. Start off at a slower speed and then increase gradually to find the optimum working speed for the towing vehicle.
  • Page 17 5.9 GRADING ALL WEATHER ARENAS Before beginning work the surface needs to be inspected to understand the construction layers of the surface and to locate the depth of any membranes that may have been incorporated. These must be avoided at all costs, but there is usually enough depth above the membrane to allow reincorporation of the upper materials.

  • Page 18: Maintenance & Service

    MAINTENANCE / SERVICE SERVICE SCHEDULE DAILY WEEKLY MONTHLY Check tyre pressures Check condition of tyres Visual check to ensure nothing is loose Check all nuts and bolts Oil the coupling mechanism and check for wear Grease all grease points TYRE / PRESSURE Tyre pressure for: Wanda 20 x 7 - 8 (Min 4 Psi Max 10 Psi) ! ! ! !

  • Page 19: Specifications

    SPECIFICATIONS LSH200P Max machine width 1557mm Max machine Height 971mm Max machine length (Including drawbar) 2622mm Max working width 1500mm Weight 208kg Hitch 50mm ball swivel coupling Raise / Lower Electric Wheel / Tyres WL/TY 20 x 7 - 8 Max speed 20mph Spring tines...

  • Page 20: Parts Diagram And List

    PARTS DIAGRAM AND LIST Contact Logic Manufacturing Ltd for parts information...
  • Page 21 We accept no liability for normal wear and tear, misuse or abuse, or where recommended maintenance has not been carried out. All guarantee work must be authorised by Logic Manufacturing Ltd. prior to any work being done. Work carried out without our consent may not be reimbursed.

  • Page 22: Declaration Of Conformity

    DECLARATION OF CONFORMITY 93 / 44 EEC LOGIC MANUFACTURING LTD Foundry Industrial Estate Bridge End HEXHAM Northumberland Product Type: LSP150P Covered By Technical File Number: CE – LSP150P Serial Number: Standards and Regulations Used: The Supply of Machinery (Safety) Regulations 1992 HSE Guidelines on ATV Equipment (Agric Sheet No.

Table of Contents