Summary of Contents for MacAllister MSID18-Li
- Page 1 18V Impact Driver MSID18-Li EAN: 3663602798804 WARNING: Read the instructions before using the product!
-
Page 2: Table Of Contents
MSID18-Li Let’s get started... These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting Started... Safety information Symbols Your product Technical specifications Before you start more detail... Intended use Product functions... -
Page 3: Safety Information
Safety information MSID18-Li Safety warnings General power tool safety warnings WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - Page 4 Safety information MSID18-Li > Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. > Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
- Page 5 Safety information MSID18-Li > Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. > Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts.
- Page 6 Safety information MSID18-Li > Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools .
- Page 7 Safety information MSID18-Li > Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Page 8 Safety information MSID18-Li Additional safety warnings for charger > This charger can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the charger in a safe way and understand the hazards involved.
- Page 9 Safety information MSID18-Li Additional safety warnings for battery packs > Do not attempt to charge the battery pack with any other charger than the one supplied. The charger and battery pack supplied with it are specifically designed to work together.
- Page 10 Safety information MSID18-Li Emergency Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter. This will help to prevent risks and hazards. > Always be alert when using this product, so that you can recognise and handle risks early.
-
Page 11: Symbols
Symbols MSID18-Li Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. Volt, (alternating voltage) ºC... - Page 12 Symbols MSID18-Li The product complies with the applicable European directives and an evaluation method of conformity for these directives was done. WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
-
Page 13: Your Product
Your product MSID18-Li Your product 1. Work light 7. Handle 2. Tool holder 8. Battery pack 3. Sleeve 9. Release button 4. Air vents 10. Power / charging status indicator light 5. Forward / reverse rotation control switch 11. Charging base 6. - Page 14 MSID18-Li Impact driver > Rated voltage 18 V d.c. > Rated no load speed n 0-2200/min > Bit holder / Tool holder Hex, 6.35 mm > Driving capacity 6 x 120 mm Weight > 1.4 kg (including battery pack) Battery pack >...
-
Page 15: Technical Specifications
Rating Label Explanation MSID18-Li = MODEL NUMBER MS = MacAllister(Brand) ID=Impact Driver 18 = 18 V d.c. - Page 16 Before you start MSID18-Li Setup WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the pictures provided as a visual guide to easily assemble the product!
- Page 17 Before you start MSID18-Li Battery pack Release / Attach > Lock the ON/OFF switch (6) to avoid accidental starting by moving the forward / reverse rotation control (5) into the middle position (see section “Product functions – Forward / reverse rotation control”).
- Page 18 Before you start MSID18-Li > Slide the battery pack (8) into the charger base (11) until it locks in place (Fig. 4). > Connect the charger (12) to the power supply. The indicator light (10) lights in red when battery is charging and green when charging is finished.
-
Page 19: In More Detail
MSID18-Li more detail... Intended use Product functions General operation Care and maintenance Trouble shooting Recycling and disposal Guarantee EC declaration of conformity... -
Page 20: Intended Use
Intended use / Product functions MSID18-Li Intended use This product is intended for tightening and loosening screws, bolts, nuts with respective driver / hex nut driver bits. It must not be used for drilling and should not be used for working on materials that are dangerous to health. - Page 21 Product functions MSID18-Li Forward / reverse rotation control Change the rotational direction from forward to reverse by pressing the forward / reverse rotation control (5). WARNING! Only change the rotational direction when the product is switched off and has come to a complete stop! Always ensure that the forward / reverse...
- Page 22 Product functions MSID18-Li NOTE: If you are using the product for the first time after changing the rotational direction, a locking sound may be heard. This is normal and does not represent a defect. Automatic work light (Fig. 10) The work light (1) will automatically illuminate by pressing the ON/OFF switch (6).
-
Page 23: General Operation
General operation MSID18-Li General operation > Check the product, its battery pack and charger as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. > Double check that the accessories and attachments are properly fixed. -
Page 24: Care And Maintenance
Care and maintenance MSID18-Li Care and maintenance After use > Switch the product off, remove the battery pack and let it cool down. > Check, clean and store the product as described below. The golden rules for care WARNING! Always switch the product off, remove the battery pack and let the... -
Page 25: Troubleshooting
Care and maintenance / Troubleshooting MSID18-Li Maintenance Before and after each use, check the product and accessories (or attachments) for wear and damage. If required, exchange them for new ones as described in this instruction manual. Observe the technical requirements. -
Page 26: Recycling And Disposal
Troubleshooting / Recycling and disposal MSID18-Li Problem Possible cause Solution 1. Product does not 1.1. Forward / reverse 1.1. Push forward / reverse start rotation control switch rotation control switch to at center lock position left / right 1.2. B a t t e r y p a c k n o t 1.2. -
Page 27: Guarantee
MSID18-Li Guarantee At MacAllister we take special care to select high quality materials and use manufacturing techniques that allow us to create ranges of products incorporating design and durability. That’s why we offer a 2 year guarantee against manufacturing defects on our MacAllister power tool products. -
Page 28: Ec Declaration Of Conformity
Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom Declare that the product: 18V cordless impact driver MSID18-Li Serial number: 000001-999999 Complies with the essential health and safety requirements of the following directives: 2006/42/EC The Machinery Directive... - Page 29 Manufacturer • Fabricant • Producent • Hersteller • Producator • Fabricante: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom www.kingfisher.com/products Distributor: B&Q plc, Chandlers Ford, Hants, SO53 3LE United Kingdom www.diy.com Screwfix Direct Limited, Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom www.screwfix.com To view instruction manuals online,...