Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Contacta IL-K300
Summary of Contents for Contacta IL-K300
- Page 1 Above the Counter Loop System IL-K300 Installation & User Guide January 2018...
-
Page 3: Table Of Contents
The Loop Driver Handy Tips Using the System Maintenance Troubleshooting Contacta has a policy of continuous product development, therefore small specification changes may not be reflected in this manual. Images, labels, packaging, accessories and product colors are subject to change without notice. -
Page 4: Product Overview
Product Overview Our Above the Counter loop system provides clear communication with hearing device wearers, especially where background noise is a problem or clear speech is restricted. The aerial is combined with the sign and is fixed to the counter or desk surface, which enables your customers to easily spot the loop and get maximum benefit from it. -
Page 5: Recommended Tools
Recommended Tools • Cable tacker • 2.5mm flat head screwdriver • Phillips PH2 screwdriver (or equivalent) • Wire cutters/strippers • Battery drill • Assorted drill bits • Zip ties • Electrical insulation tape • Hearing loop listener Installation Instructions We recommend that installation is carried out by a qualified engineer, adhering to the relevant standards. - Page 6 7. Check the cable route to the driver location, especially cable length to other components and access through the counter top. 8. Place the driver in your preferred location under the staff counter. Fixing points 9. Mark the 4 fixing points for drilling. 10.
-
Page 7: Initial Set-Up
Initial Set-Up Once installed, volume adjustments are not needed as the driver self-adjusts; the system is ready to operate. Please ensure you test the loop using one of our loop listeners. The Loop Driver The driver has no buttons on the front panel. Please see below an overview of the indicators on the front panel of the HLD2 driver. -
Page 8: Handy Tips
Handy Tips Removing Green Connectors Each component comes fitted with two-way and three-way connection plugs located in the appropriate sockets at the rear of the driver. If wires require to pass through small apertures, the connection plugs may be removed temporarily. The plugs connect to the cables by screw terminal connections so cables can... -
Page 9: Using The System
Using the System • Face the microphone and speak normally from your seated/ standing position • The speech is converted to an alternating magnetic field and transmitted via the loop aerial • This is picked up by the telecoil in the customer’s hearing device and converted back to speech There’s nothing more you need to do! If the hearing device wearer doesn’t pick up the signal:... -
Page 10: Maintenance
Maintenance To prolong the life of the product, the following procedures should be carried out on a regular basis, keeping the system at its optimal performance: • Ensure all connectors are firmly inserted into their sockets on a regular basis •... -
Page 11: Troubleshooting
Troubleshooting Symptom Possible Fault Action No power detected 1) Power jack not plugged in or 1) Check power jack is firmly through amplifier faulty plugged in 2) Plug fuse has blown 2) Put the unit to one side and seek further advice 3) Faulty power supply unit 3) Change the power supply unit... - Page 12 Local dealer: Contacta, Inc. (616) 392-3400 support@contactainc.com www.contactainc.com...
Need help?
Do you have a question about the IL-K300 and is the answer not in the manual?
Questions and answers