Summit CR4SS24 Owner's Manual page 8

Adequate ventilation of the space below the countertop must be provided to ensure proper operation
of the cooktop. Heat transferred from the cooktop bottom pan during operation will overheat an
improperly ventilated area.
Allow a 2" minimum clearance between the metal bottom of the cooktop and any combustible
surface located below, i.e.: the upper edge of a drawer installed below the cooktop. Failure to
provide proper clearances and ventilation may result in a fire hazard. If the cooktop is installed
above an oven, keep the cooktop's power cord from contacting the oven.
Cooktop dimensions and countertop cutout dimensions are shown below:
Models: CR4SS24, LCR4S and CCE24S4
Model: CR430SS
NOTE: When making the countertop, radius the corners of the cutout (1/4" radius is typical). This will
prevent cracking of the countertop. Follow the countertop manufacturer's instructions
regarding the minimum corner radius and reinforcement of corners.
8