Power Management; Energy Declaration; Maintaining; Troubleshooting - Acer HD2201 User Manual

Power management

Energy declaration

When connected to a computer that supports the VESA Display Power Management Signaling
(DPMS) Protocol, the monitor can conserve significant energy by reducing power consumption
during periods of non-use. When your computer goes into the energy saving mode, the monitor
will then enter the Active Off mode (sleep). In the Active Off mode the Power LED will still show
orange.
Use these conventions and the power can be reduced to the following levels:
To "wake" the monitor when it is in Standby/Active Off mode, move the mouse or press any
keyboard key.
You can change the monitor's power management settings using the Windows Control Panel. For
more information, see your computer's User Guide.

Maintaining

To keep the monitor in optimal working order:
•
•
•
•
•

Troubleshooting

making any judgments about the picture quality.
If you have problems with the monitor, the information in this troubleshooting section may help
you solve them.

No power

Make sure that the power cord is connected correctly to both the back of the monitor and the
power outlet. For more information about connecting the power cord, see
monitor" on page
12
Using Your Gateway Flat-Panel Monitor
VESA State LED Indicator
On Blue
Standby Orange
Off Purple
Do not block the ventilation holes.
Do not expose the monitor to rain or use near water.
Keep the monitor away from radiators or heat vents.
Keep the monitor out of direct sunlight.
Caution
Do not use any type of abrasive pad or glass cleaner. You will permanently
scratch the screen.
To clean the monitor, use a soft cloth slightly moistened with water only. Wipe the cabinet,
screen, and controls.
Important
Make sure that the monitor has warmed up for approximately 30 minutes before
2.
Power Consumption
<55 W
<2 W
<1 W
"Connecting the