Changing Zip Code; Changing Time Settings - TCL Roku TV 8 Series User Manual

Changing ZIP Code

Only in connected mode, your TV needs to know your ZIP Code so that it can display the correct channels
and program guide information. It attempts to determine your ZIP Code by using information from your
Internet connection; however, the information available from this source is not always accurate. To
ensure you have the most accurate program guide information, use the ZIP Code option to enter your
correct ZIP Code.
To set your correct ZIP code, from the Home screen menu, navigate to Settings > System > ZIP Code,
and then pressing the RIGHT arrow. Use the on-screen number pad to select each of the digits of your
ZIP Code, and then select OK.

Changing time settings

You can change time settings to suit your preferences. You can find the following settings by navigating
from the Home screen menu to Settings > System > Time:
•
Sleep timer – Set a time delay after which the TV will automatically shut off. This setting
reflects the setting you can make in the Options menu from any TV input, as explained in
Options menu
•
Time zone – Select whether to set the time zone automatically or manually, and if set
manually, select your current time zone. Typically, a TV connected to the Internet can discover
its own time zone automatically, and a TV that is not connected to the Internet must be set
manually. Initially, this setting is made when you set up the TV tuner, as explained in
Antenna TV. Correct time zone information is needed to correctly display program data.
•
Clock format – Select whether to display time in a 12-hour or 24-hour format, or to turn off
time display. This setting is available only on TVs that are connected to the Internet. Non-
connected TVs do not display the time.
settings. Note that the sleep timer setting is not input specific.
117
Setting up