Table of Contents
Advertisement
Synology RackStation at a Glance
No.
Article Name
1
Power Indicator
2
Power Button
3
LAN Indicator
4
Drive Status Indicator
5
Beep off Button
6
Status Indicator
7
Drive Tray
8
Fan
9
Power Port
10
LAN Port
11
RESET Button
12
USB 3.0 Port
13
eSATA Port
14
Console Port
1
For more information about Synology Expansion Units supported by your RackStation, please visit www.synology.com.
4 Chapter 1: Before You Start
Location
Displays power status of the RackStation. For more information, see
"Appendix B: LED Indicator Table".
1. Press to power on the RackStation.
2. To power off the RackStation, press and hold until you hear a beep sound
and the Power LED starts blinking.
Displays LAN status of the RackStation. For more information, see "Appendix
B: LED Indicator Table".
Front
Panel
Displays the status of installed drives. For more information, see "Appendix B:
LED Indicator Table".
Press to deactivate beep sound when malfunctions occur.
Displays the status of the system. For more information, see "Appendix B:
LED Indicator Table".
Install drives here.
Disposes of excess heat and cools the system. If the fan malfunctions, the
RackStation will emit a beeping sound.
Connect power cord here to supply power to the RackStation.
Connect network cables here.
1. Press and hold until you hear a beep sound to restore the default IP
address, DNS server, and password for the admin account.
Back
2. Press and hold until you hear a beep sound, then press and hold again until
Panel
you hear three beep sounds to return the RackStation to "Not Installed"
status so that DiskStation Manager (DSM) can be reinstalled.
Connect external hard drives, USB printers, or other USB devices to the
RackStation here.
Connect an external SATA drive or Synology Expansion Unit
RackStation here.
For manufacturing use only.
Description
1
to the
Advertisement
Table of Contents
